LED High Bay light
1.General feature/产品常规特征:
Input: 85-270V a.c. 50/60Hz ; 50-200W ;LED Flood Light; LED投光灯
2.Applicable Compliance Process/认证流程
Note: Table below is only a typical example for your reference.
|
Process > Classification v |
Required
|
CNAS Test
|
Certificate/Doc
|
Registration
|
|
RCM for EMC/RF 无线电EMC部分 (Previously C-tick)
|
YES |
AS CISPR 15 or EN 55015 and ...please ask |
Declaration of Conformity(DoC) |
Not required |
|
RCM for Safety 安规部分 (e.g. SAA,SGS) |
YES |
AS/NZS 60598.2.1 AS/NZS 60598.1 and ...please ask |
Certificate of Suitability(CoS) |
Not required |
|
Energy Efficiency 能效部分 |
NO |
Not required |
Not required |
Not required |
Steps:
Step 1-Test according to EMC/Safety technical standards
Step 2-Technical Review and issue Declaration of Conformity
Step 3-Technical Review and issue Certificate of Approval
Step 4- EESS National Database Registration
Step 5-Labelling the RCM (Mark）
Step 6-Record keeping
Docment Checklist
1 Signed Application form WORD /or Online application form -by Lab/Consultant/Applicant
2 Signed Agreement - by Applilcant
3 Rating Label -draft
4 Brand name and/or logo
5 User Manual or Specification
6 EMC/RF Test report
7 Letter of Authorization - by Applilcant
8 Safety test report
9+as required.
3.Q & A
Why this device needs to comply with EMC/EMR/RF technical standard?
为何需要符合EMC 的技术要求？
Under Australian Communications & Media Authority’s (ACMA)’s arrangement, All devices covered by the EMC regulatory arrangements must comply with an applicable technical standard. Suppliers are required to label or maintain a Declaration of Conformity (DoC).
For more policy about this, please click the link below - Australia Government ACMA webpage .
Why the RCM ?为什么需要标注RCM？ 如何才能标注？
The RCM has recently (1 March 2013) been confirmed as the single compliance mark for all ACMA arrangements. The RCM indicates a device’s compliance with applicable ACMA technical standards—that is, for telecommunications, radiocommunications, EMC and EME.
Any person who applies the RCM label must be authorised to do so by the supplier.
Any person who applies labels without authorisation may be subject to prosecution for the misuse of a protected symbol.
More policy about this please download here.-相关政策和法规下载
How to mark the product with the RCM? RCM 在产品上如何标注？
According to AS/NZS 4417.1:2012, the RCM shall be placed on the external surface of the equipment as near as practical to the Model Number.
More detail please download here.-相关政策和法规下载
Do we still need to mark supplier code N12345 with the RCM ?是否需要标注供应商代码？
No .A supplier who has been issued with a supplier code number by the ACMA prior to 1 March 2013 can continue to use the supplier code number with the C-Tick/A-Tick until the end of the transition period. When a supplier begins using the RCM, the supplier code number will not apply. A supplier may, however, voluntarily include any form of unique supplier identification on the device.
More policy about this please download here at page 13 .-相关政策和法规下载
Will I need to Register my Device?产品需要注册到数据库吗？
NO, ONLY the equipment fall into the scope of LEVEL 3 Equipment (or Declared Article) and are considered as the high risk equipment need to conduct EESS registration.
More policy about this, please click the link below - Australia Government ERAC webpage .
Why Energy Efficiency certification is NOT applicable to this equipment?为何不需要做能效认证？
No . Currently there are no minimum energy performance standards (MEPS) requirements for LEDs. MEPS for LEDs are currently under consideration by the Department in conjunction with the Australian Lighting Industry and other professional bodies.
More policy about this, please click the link here.