Wall Switch-53
1.General feature/产品常规特征:
Input: 100-240V a.c. 50/60Hz ,Air breaker
2.Applicable Compliance Process/认证流程
Note: Table below is only a typical example for your reference.
|
Process > Classification v |
Required 要求 |
CNAS Test CNAS 测试 |
Certificate/Doc 澳洲RCM认证
|
Registration RCM注册
|
|
RCM for EMC/RF 无线电EMC部分 (Previously C-tick) |
NO |
Not required |
Not required |
Not required |
|
RCM for Safety 安规部分 (e.g. SAA,SGS) |
YES |
AS/NZS 3133:2013 and ...please ask
|
Certificate of Approval |
EESS National Database Registration
|
|
Energy Efficiency 能效部分 |
NO |
Not required |
Not required |
Not required |
Steps:
Step 1-Test according to Safety technical standards
Step 2-Technical Review and issue Certificate of Approval
Step 3-EESS National Database Registration
Step 4—Labelling the RCM (Mark）
Step 5—Record keeping
3.Q & A
Why the RCM ?为什么需要标注RCM？ 如何才能标注？
The RCM has recently (1 March 2013) been confirmed as the single compliance mark for all ACMA arrangements. The RCM indicates a device’s compliance with applicable ACMA technical standards—that is, for telecommunications, radiocommunications, EMC and EME.
Any person who applies the RCM label must be authorised to do so by the supplier.
Any person who applies labels without authorisation may be subject to prosecution for the misuse of a protected symbol.
More policy about this please download here.-相关政策和法规下载
How to mark the product with the RCM? RCM 在产品上如何标注？
According to AS/NZS 4417.1:2012, the RCM shall be placed on the external surface of the equipment as near as practical to the Model Number.
More detail please download here.-相关政策和法规下载
Will I need to Register my Device?产品需要注册到数据库吗？
YES , The equipment fall into the scope of LEVEL 3 Equipment (or Declared Article) and are considered as the high risk equipment need to conduct EESS registration.
More policy about this, please click the link below - Australia Government ERAC webpage .
Why Energy Efficiency certification is NOT applicable to this equipment?为何不需要做能效认证？
Not in scope.